carboat

Body Shop Safe Products

STEP 1
After wet sanding, first use CP-1012 with a cutting wool pad @ 1000-1400 rpm to remove sand marks.

1FP-094

 

CP-1012 (FP-094) and CP-1020

 

Are both Cleaner Polishes that are designed to cut wet sand marks left by 1000-2000 grit sandpaper.

 

Excellent for cutting light to medium oxidation and dead paint.

 

Body Shop Safe - contains no silicone or wax.

 

Contains no fillers, thus provides true cutting and leaves the surface smooth and shiny.

 

CP-1012 is more aggressive than CP-1020.

 

Since cleaner polishes do not provide protection, it is important to use Allbrite’s NS Glaze after Step 1 & 2.

 

 

 

2fp-094wbuffer


STEP 2
Use CP-1020 with either a cutting foam pad or soft wool pad @ 1000-1400 rpm to eliminate minor imperfections and swirl marks left behind by CP-1012 in Step 1.

3FP-094

 

CP-1020 (FP-095) and CP-1012

 

Are both Cleaner Polishes that are designed to cut wet sand marks left by 1000-2000 grit sandpaper.

 

Excellent for cutting light to medium oxidation and dead paint.

 

Body Shop Safe - contains no silicone or wax.

 

Contains no fillers, thus provides true cutting and leaves the surface smooth and shiny.

 

CP-1012 is more aggressive than CP-1020.

 

Since cleaner polishes do not provide protection, it is important to use Allbrite’s NS Machine or Hand Glaze after Step 1 & 2. If you have already removed swirls by Step 2 then you can use NS Hand Glaze in Step 3. However, if you still have few swirl marks left on dark color cars, the use of NS Machine Glaze is recommended.

 

 

 

4fp-095wbuffer

                                    CP-1020 (FP-095)

STEP 3.1
Use NS Glaze with a finishing foam pad or soft wool pad. NS Glaze enhances clarity and provides protection.

5FP-096

 

NS MACHINE GLAZE (FP-096)

 

NS MACHINE GLAZE - Non Silicone Glaze is a special glaze that enhances clarity and leaves the surface shiny with a protective gloss.

 

Body Shop Safe-contains no silicone or wax.

 

Contains no fillers and has very fine abrasive powders that actually remove the swirls, not just hide them.

 

Improves clarity and leaves the surface shiny.

 

Contains polymer for protection and will not wash off easily. Thus, a car detailed with NS Machine Glaze will not dull within a few washes, which means that the customer will not bring it back and complain after just one or two washes.

 

It is easy to do a final cleanup because Allbrite products do not leave any sticky, powdery residue.

 

After you wash the vehicle, there is no need for a hand glaze. Just use Allbrite Show Shine (FP-048) to enhance the gloss for customer appeal.

 

 

 

 

6fp-096wbuffer

                                       NS GLAZE (FP-096)

STEP 3.2
Use NS Hand Glaze with a finishing foam pad or soft wool pad. NS Hand Glaze enhances clarity and provides protection.

7FP-096

 

NS HAND GLAZE (FP-096H)

 

NS HAND GLAZE - Non Silicone Glaze is a special glaze that enhances clarity and leaves the surface shiny with a protective gloss.

 

Body Shop Safe-contains no silicone or wax.

 

Contains no fillers.

 

Improves clarity and leaves the surface shiny.

 

Contains polymer for protection and will not wash off easily. Thus, a car detailed with NS Hand Glaze will not dull within a few washes, which means that the customer will not bring it back and complain after just one or two washes.

 

It is easy to do a final cleanup because Allbrite products do not leave any sticky, powdery residue.

 

After you wash the vehicle, just use Allbrite Show Shine (FP-048) to enhance the gloss for customer appeal.

 

 

 

 

8fp-096wbuffer

                                     NS GLAZE (FP-096H)

Important Note
Allbrite’s 3-step system is easy to use, saves time and takes the mystery out of doing the job right the first time. The reason for using the buffer at 1000-1400 rpm is that, at lower speeds, the cleaner polishes cut better and the job gets done faster. Allbrite products do not leave any sticky, powdery residue so cleanup is quick and easy. The result is a smoother and shinier surface with less imperfections.

Tips
• Keep the pads flat with even pressure to get less swirl marks.
• Buff in a straight line, because the traditional use of overlapping circular motion produces swirls.