Allbrite has variety of acid cleaners that are guaranteed to fight rust, road film, grease, grime and hard to remove water spots, even from the glass, in a safe and efficient manner. These cleaners take the mystery and effort out of the doing the job correctly every time. And because of the effectiveness of these formulas, it will cut the overall time it takes to prep the car’s many surfaces.
 |
WIRE WHEEL ACID (FP-033) CORROSIVE |
||
| • | One step acid cleaner designed for spoke & chrome wire wheels. | ||
| • | Contains hydrofluoric and sulfuric acids (nasty acids). | ||
| • | Not recommended for aluminum or alloy wheels & glass surfaces. | ||
| • | Concentrated formula. Dilute 1 part acid with 4 parts water and spray. Leave on for 30-60 seconds and then hose off. | ||
 |
SAFE WHEEL ACID (FP-034) CORROSIVE |
||
| • | Safe acid cleaner for all types of wheels including aluminum or alloy. | ||
| • | Cleans heavy brake dust and road film easily. | ||
| • | Ideal for removing mild water spots on painted and glass surfaces. | ||
| • | If aluminum gets a little hazy, use Allbrite’s Aluminum/Metal Polish (FP-069) or Fine Metal Polish (FP-078) to restore it to a “mirror finish.” | ||
|
FALLOUT LIQUID (FP-046) CORROSIVE |
||
| • | Mixture of oxalic acid and specialty surfactants. | ||
| • | Removes fallout and rusted, dead paint quickly and easily. | ||
| • | After preparing surface with Fallout Liquid, use Allbrite’s Clear Coat Polish (FP-061) to smooth out the surface and apply Allbrite waxes for protection. | ||
| • | Allbrite also carries Fallout Powder (FP-092), which is a multicolor product and contains surfactants.. We also sell pure oxalic acid as Hot Fallout Powder (FP-092H). | ||
 |
WATER SPOT REMOVER (FP-041) CORROSIVE |
||
| • | Easily removes water spot left behind from hard water from sprinkler systems or not drying the car fast enough after washing it. | ||
| • | Excellent for use on paint & glass. | ||
| • | Safe for all surfaces when used as directed. | ||
| • | Spray water on area to be cleaned. Then spray acid and leave it for up to 1-2 min. Rub it with a wash mitt or soft sponge soaked with car wash soap or degreaser and then rinse it off. If all the hard to remove water spots are not gone, repeat the procedure. | ||
| • | Afterwards apply Allbrite Wax because the use of acid product removes the wax from the surface. | ||
